Over time, Asphalt starts to develop issues. These issues may vary from small cracks to large potholes. A1 Driveway Sealers Toronto will provide you with excellent workability. And our professionals will smoothly solve all of your problems.
Throughout this blog, we’ll discuss the causes, types and solutions of the common Asphalt Seal Coating problems.
Common Asphalt Problems and their Causes:
There are several causes of asphalt problems, the most important one are:
- We must apply the sealant on the clean surface. Otherwise, the dirt and vehicle fluid will not let the sealant to adhere with the surface. And this results in the premature cracking of the seal coat.
- We can clean the surface in different ways. Such as by pressure washers, wire brushes, compressed air, or scrapers.
- The sealant cannot bond with the oil or with other vehicle fluids. You should clean the surface before applying the sealant. And a primer is necessary before seal coating. Furthermore, if the surface got damaged because of oil, it must be repaired first.
- A sealant can only cover small damages. So if the pavement gets damaged with large cracks or potholes. It would help if you fixed it first to avoid Asphalt problems.
- Seal coating is not for the new pavement. So if you apply sealant on the new pavement, it will result in the Asphalt problems. At least after 12 months of a pavement building, the sealant should be applied.
- An old pavement will have Asphalt problems if we do not use a primer over it, before seal coating. A1 Driveway Sealer’s services are transparent, and we’ll let you know about all the problems and their root causes along with the solution as well.
You might be interested in Asphalt Sealing: What Makes Our Asphalt Sealant the Best
Types of cracking:
Cracking is the most usual problem occurring due to Asphalt issues. Some of the examples of crack are:
Alligator Cracking:
It happens because of the structural damage to the pavement. Most importantly, its name indicates its resemblance with the alligator’s scales. This cracking keeps on growing. So it must be controlled as soon as possible.
It occurs because of:
- Heavy traffic.
- Little pavement thickness.
Block cracking:
Its name indicates that it is a block-shaped cracking. A most important point of this type of cracking is that it is not loaded dependent.
It occurs because of:
- Hardening of Asphalt with age.
- Or a poor selection of Asphalt.
Longitudinal cracking:
These cracks are named so because they run along the road. And they are not loaded dependent.
These cracks occur because of:
- Hardening of Asphalt with age.
- Poor construction of joints.
- Cracks are coming up from the under layer.
Edge Cracking:
These are the longitudinal cracks near the edge of the pavement. And they are mostly seen in rural areas.
These cracks occur because of:
- Asphalt shrinkage.
- Poor drainage.
- Heavy traffic.
Depressions:
These small lower areas can cause severe damage for the property owners and the vehicles as well. As they collect water in them, which leads to the asphalt breakage. They are maybe the result of poor compaction.
Potholes:
The penetration of water usually forms these holes into the pavement. As a result of this penetration, these large depressions form. And the sharp edges of the potholes are hazardous for the vehicles. And there is a trip hazard for the pedestrians as well.
Upheaval:
Upheaval is the swelling of the pavement, which results from the freezing of the excess of the present moisture underground.
Shoving:
Ripples form as a result of shoving. There are many causes for the ripples formation. Some of them are:
- Soft Asphalt.
- Too much Asphalt.
- Weak sub-ground.
Solutions to the Asphalt problems:
One of the best solutions is to choose the best contractors, such as A1 Driveway Sealer Toronto. Our quality standards are highest in the industry. And we are confident about our services. Our professionals are well aware of the importance of money and time. And we’ll save both for you. With our best services, you are going to get more than your investment.
Besides this, some standard solutions we provide to our customers are:
- We remove the affected area thoroughly and apply asphalt patch.
- Also, we use crack sealants to seal the crack.
You can also take some preventive measures to avoid Asphalt problems:
- The base must be strong and cohesive.
- Good drainage.
- Properly seal the coated surface to prevent damage because of temperature fluctuations and extreme weather conditions.
Call 437-345-9575 for the solution of your Asphalt problems. Or either fill the online form and get a free quote.